Turn Pixels into Inches in a Flash and With Accuracy.

PX to Inch Converter is an extremely basic, yet, a strong online calculator that helps you to transform digital measurements (pixels) to the real life physical measurements (inches). This converter is fast, accurate and can make you a result in a few seconds be it a web design, print layout or just the size of the screen of any particular device.

The smallest units of display in the digital design are known as pixels (PX) and the unit of physical measure in the design is known as inches (IN). The alternation of both of them assists designers to have the confidence that the digital resources will appear in the right size when they are shown or printed.

Why Convert Pixels to Inches?

Whatever you make on the computer (banner, logo or poster) is shown on the computer by pixels. Since, however, to have it printed, or to compare the size of a screen with any other, you want the actual physical size in inches. That is where a PX to Inch Converter will be needed.

This is converted on the basis of the figure of PPI (Pixels Per Inch). The requirements of a World Wide Web Consortium (W3C) suggest that a typical PPI of the screen is 96. The dissimilar apparatus and print settings, however, vary in utilizing PPI that is a direct measure of the worth of inch.

Its formula is simple:

Inches = Pixels / PPI

Where:

• Pixels (PX) = pixels during digital representation.
• PPI (Pixels Per Inch) = the number of pixels per inch of your display/image.

Example:

Assuming that you have got a picture with 960 pixels and you are viewing or printing it on a 96 PPI monitor or inkjet, then:

Inches = 960 / 96 = 10 inches

On a 96 PPI screen or print, of which your picture will be 10 inches or so.

At a 300 PPI where this identical image is printed, then:

Inches = 960 / 300 = 3.2 inches

As it is possible to observe, the more high the PPI values, the smaller actual print would be and the more detailed and clearer will be the image.

Working with Web Design

The majority of layouts in web designing are done individually at a standard of 96 PPI. It implies that 96 pixels would be equivalent to one inch on the screen. This conversion is attempted by designers in order to create the same proportions of different devices.

The multiplying of 5 inches should be done on the screen in case you would like to be able to have an example: You are designing a web banner that should be placed.

5 inches × 96 PPI = 480 pixels

It means that in order to have your banner on a standard screen, 5 inches, you should have your banner 480px wide.

All these calculations are done by PX to Inch Calculator which will never tell you of any mistake that was made in wasting time when making design changes.

Working with Print Media

What is required as far as the print media is concerned is to determine the relationship between the two, which are the PPI (Pixels Per Inch) and the DPI (Dots Per Inch).

• A digital picture is quantified in the form of the resolution in PPI (Pixels Per Inch).
• The amount of ink dots per inch or the resolution of a printer is DPI (Dots Per Inch).

To produce good prints, the designers normally utilize 300 PPI/DPI.

For example:

An 8 x 10 inch picture with 72ppi will be printed out with the picture appearing blurred. However, the image will be professional and clean even with 300 PPI of the image with the same size of 8 x 10 inches.

Hint: When doing any design always make sure to design with a minimum of 300 PPI or it will pixelate when you finally get to print.

Image Dot to Inches/Screen Size Calculator.

The converter can as well be applied in calculating the physical size of the digital displays comprising of monitors, tablet, or smart phones.

To do this, you need:

• The pixel resolution (e.g., 1080 × 2340)
• The pixel density (e.g., 400 PPI)
• And then all one has to do is to take the values of a single pixel divided by the PPI in order to obtain the dimension in inches.

For example:

Height = 2340 / 400 = 5.85 inches

Width = 1080 / 400 = 2.7 inches

The size of the screen is around 5.85 2.7 inches.

Calculation of the PX to Inch Converter.

It is not hard to divide into pixels to multiply to inches in a second, and it works as follows:

1. Enter Pixel Value:

In Pixel Value field, type in the number of pixels that you would like to convert.

2. Select or Enter PPI:

Select type in standard 96 PPI to create a web or type in your own PPI to create a print or device specific print.

3. Click Convert:

The size will be calculated and the size will be indicated in as much as the size in inches.

4. Copy the Result:

The value is converted and can be copied to utilize it in your designing project or manual.

No more -no more hand-calculations, no more errors of conception, no more mistakes in the calculation.

Benefits and Use Cases

The practical uses of the use of PX to Inch Converter are:

For Web Designers

• Machines have equal visual ratios.
• Swiftly convert the screen to reality map design.

For Print Designers

• Make sure that the size of the posters, flyers and packages is correct.
• Blurred photographs should be avoided due to low PPI photographs.

Equipment producers or equipment developers.

• Determine actual screen and mobile size.
• Dimensions of lifestyle product listing and technical specifications.

For Students and Creatives

• Get to know how to convert the digital resolutions into real life values.
• Set it, use it in infographics, in art projects.